Integration Wiper, Washer and Window cleaning cycle in Milestone.

Apply to: PTZ camera: SA-BC820H1, SA-BC820H1-TC620D and EX-BC820H1,  EX-BC820H1-TC620D

                Fixed camera: SA-BC820H1 F WW and  EX-BC820H1 F WW

 

  • Open the device webpage and go to “Pan Tilt”, “Pan/Tilt control” and program what is in the print screen below.

 

 

  • In Milestone go to set up.

Select AUX1on, place this as a bottom on your screen, change the name for example in “wiper on”.

Select AUX3on, place this as a bottom on your screen, change the name for example in “washer on”.

Select AUX4on, place this as a bottom on your screen, change the name for example in “window cleaning cycle”.

When everything is saved:

When you select the buttom “wiper on” on your screen, only the wiper is activated  for a short time.

When you select the buttom “washer on” on your screen, only the washer is activated for a short time.

When you select the buttom “window cleaning cycle”  on your screen:

  • PTZ camera: head is moving to the window cleaning position, washer and wiper are activated for a short time, head is moving back to his original position.
  • Fixed camera: washer and wiper are activated.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments